NetIPC 3000/XL Programmer's Reference Manual (5958-8600)
Table Of Contents
- 1 NetIPC Fundamentals
- 2 Cross-System NetIPC
- 3 NetIPC Intrinsics
- 4 NetIPC Examples
- A IPC Interpreter (IPCINT)
- B Cause and Diagnostic Codes
- C ErrorMessages
- D Migration From PTOP to NetIPC and RPM
- E C Program Language Considerations
46 Chapter2
Cross-System NetIPC
Software Required
Software Required
For cross-system NetIPC to function properly, the software revision
codes must be as follows:
• NS/1000 software revision code 5.0 or greater for the HP 1000.
• NS 3000/XL Release 1.2 or later for the HP 3000.
• LAN/9000 Series 800 Release 2.1 or later for the HP 9000 Series 800.
• NS-ARPA Services Release 6.2 or later for the HP 9000 Series 300.
• Revision B.00.01 for the personal computer.
To use cross-system NetIPC, you must first have a good understanding
of the NetIPC intrinsics. Review Chapter 3 , “NetIPC Intrinsics,” which
provides detailed information about the calls before and while you read
this chapter.