NetIPC 3000/XL Programmer's Reference Manual (5958-8600)

Appendix B 183
Cause and Diagnostic Codes
Diagnostic Codes From a Remote Host
Diagnostic Codes From a Remote Host
The following table lists diagnostic codes from a remote MPE XL
system that could be received on the local system.
Table B-2 X.25 Diagnostic Codes From a Remote Host
Diagnostic Code Meaning/Cause
48 Inactivity timer expired.
65 Facility not allowed.
70 Incoming call barred.
160 DTE specific for example: restricted access, unknown circuit, unknown
local facility, circuit in use, destination not allowed, or reverse charge call
not accepted.
161 DTE operational
162 DTE not operational. Level 3 out of order, or Level 2 out of order.
163 Network congestion.
166 D-bit procedure not supported