NetBase for MPE Reference Guide

NetBase Spooling
7-7
Configuring Remote Spooling
Below are the additional SPOOL parameters associated with NetBase Spooling. The default values
are usually sufficient. For a full description of each parameter, turn to Chapter 3 “Using CONFIG”.
C> l spool
SPOOL - Remote Transfer Timeout.... 120
SPOOL - Transfer Server Allocation. 4
SPOOL - Maximum Block (bytes)...... 8192
SPOOL - Maximum Files per Node..... 64
SPOOL - Use S' and J' on incoming.. Y
SPOOL - Change jsname to node name. N
SPOOL - Using SpoolMate............ N
SPOOL - Spooling Export Priority... DEFAULT
SPOOL - Spooling Import Priority... DEFAULT
SPOOL - Enable HP-UX Receiving..... N
SPOOL - Enable BOOTP daemon........ N
SPOOL - Enable LPD daemon.......... N
SPOOL - Spooling on startup........ Y