NetBase for MPE Reference Guide

Using CONFIG
3-33
Example
To add node 1 to NetBase's configuration:
C> A 1
System Name........................ SYS-A
Startup Access (S/I/O/A/W)......... [A]
Node Name.......................... SYS-A
Node Connection Timeout............ [180]
SPOOL - Direction (N/E/I/B)........ [N] B
SPOOL - Allow incoming job streams. [N]
SPOOL - Enable Export Flow Control. [N]
SHADOW - Direction (N/E/I/B)....... [N] I
SHADOW - Export queue size......... [4096]
SHADOW - Import queue size......... [4096]
SHADOW - Post queue size........... [4096]
SHADOW - Initial Post Priority..... [DEFAULT]
SHADOW - Post Inactivity Timeout... [0]
SHADOW - Enable Post Logging....... [N]
SHADOW - Log all Post Transactions. [N]
SHADOW - Save Process Info on Post. [N]
SHADOW - Abort Post on Errors...... [N]
SHADOW - Buffered Exporting........ [Y]
SHADOW - Transfer mode only........ [N]
SHADOW - Transfer Single Queues.... [N]
SHADOW - Transfer ACK Frequency.... [0]
SHADOW - Post Directory Filename... [DEFAULT]
C> LIST NODES
Node Sys name Line Type Startup Spool Shadow
1 SYS-A N A B I
Currently 1 Nodes are defined
C>