NBSpool for MPE Reference Guide

Troubleshooting NBSpool
7-11
Error Message Explanation/Action
INVALID SUBSET KEYWORD SPECIFIED
The keyword you specified for a subset does not
exist.
*2
INVALID USE OF “NOT” DESIGNATOR
The
NOT
designator (
~
) should be applied to
further limit a subset. For example,
file=A*,~AR
.
Specifying
file=A*,~R*
would be invalid. Correct
your syntax and re-execute.
*2
INVALID USE OF LINE RANGE
DESIGNATOR
You may not specify a line range at this point in
the command, or possibly with this command.
Verify the syntax and re-enter.
*2
INVALID USER NAME SPECIFIED
The name you specified exceeds
8
characters in
length, it does not begin with an alphabetic
character, or a user with that name does not
exist.
*2
INVALID WAIT VALUE SPECIFIED
The value you entered for
WAIT
is invalid. Wait
values must be between
1
and
600
seconds. Check
your typing and re-enter.
*2
INVALID WORKSTATION ID
Verify the workstation
ID
, edit the command, and
execute it.
*2
LINE RANGE IS BACKWARDS
The first line listed in the range is larger than the
second. Verify the range and re-enter.
*2
LOCAL NODE NAME CANNOT BE
SPECIFIED AS A DESTINATION
You cannot move or copy from the local node to
the same local node.
*2
LOCKWORD IS INVALID WITH WILDCARDS
You must be more specific (do not use wild
cards) when you are specifying lockwords.
*2
LOGICAL DEVICE NUMBER IS INVALID
The
LDEV
number you specified does not exist.
*2
Login name NBSPOOL is not valid for this
file server
Check if
NBSPOOL
is a valid user for Novell,
using
SYSCON
.
LOGO COMMAND IS NOT SUPPORTED ON
THIS DEVICE
You specified the logo command for a device
which has not been configured for
BANNER
.
Verify the device, and ask your system operator
to enable this device to run
BANNER
.
MISSING “FILE=” PARAMETER
This command requires the
;FILE=
parameter.
*2