NBSpool for MPE Reference Guide

Chapter 4
4-22
SET
The SET command sets run time and configuration options for NBSpool. This command can be
used with the
INPUTPASS parameter to prevent users from accessing the NBSpool input commands.
SET Syntax
I> SET {INPUTPASS=[password]}
SET Parameters
Parameter Description
INPUTPASS
This parameter changes/sets the input mode password. This requires users to
enter a password upon the first entry to input mode. Setting the password
requires
SM capability.
password
This parameter specifies a string from
1
to
16
characters. If omitted, the
input mode password will be removed.