NBSpool for MPE Reference Guide

NBSpool Output Commands
3-95
The outpri is being used here to flag what
$STDLIST
s have been archived to tape. The list below
displays some more
$STDLIST
s that need to be appended to the tape.
O> SHOW $STDLIST
6 Spool files Qualify
DFID FILENAME JOB USER NAME SECTORS DEVICE PRI WHEN CREATED
---------------------------------------------------------------------------
#O3486 $STDLIST #J1080 MGR.NETBASE 40 LP 1 10/10/88 13:22
#O3473 $STDLIST #J1074 MGR.NETBASE 36 LP 2 10/10/88 13:01
#O3488 $STDLIST #J1082 MGR.NETBASE 36 LP 1 10/10/88 13:22
#O3489 $STDLIST #J1083 MGR.NETBASE 36 LP 1 10/10/88 13:22
#O3415 $STDLIST #J1058 MGR.NETBASE 36 LP 2 10/05/88 10:51
#O3399 $STDLIST #J1049 MGR.NETBASE 36 LP 2 10/03/88 14:34
Total of 220 sectors for displayed spool files
O> STORE $STDLIST,%1;NEWPRI=2;APPEND
3 Spool files Qualify
Waiting for operator to mount tape... Tape mounted.
DFID FILENAME JOB USER NAME SECTORS STATUS
---------------------------------------------------------------------------
#O3486 $STDLIST #J1080 MGR.NETBASE 40 Stored
#O3488 $STDLIST #J1082 MGR.NETBASE 36 Stored
#O3489 $STDLIST #J1083 MGR.NETBASE 36 Stored
Rewinding...
Number of spool files stored = 3 Not stored = 0
O> EXIT
Note. Since the NSPOOL tape already existed no reply from the operator was
required. All that is necessary is that the tape be placed online.