NBSpool for MPE Reference Guide

NBSpool Output Commands
3-57
Parameter Description
NOENV
This parameter prevents inserting Term Type file initialization strings
from being added to the output data. By default, these strings will be
inserted in the output data.
DUP
This parameter causes a spool file to be sent multiple times to the
destination if the number of copies is greater than one. Useful if the
destination does not support multiple copy printing.
printername
This parameter specifies the name of a configured printer definition.
Printer definitions are maintained by the
PRINTDEF
program.
PTYPE
This parameter instructs NBSpool that this is a LAN-connected printer
record
This parameter specifies the first record in the spool file that will be sent
to the remote system or printer. The
LIST
command can be used to
determine this number.
seconds
This parameter specifies the number of seconds to wait for a response
from the remote system before aborting a transfer. This should only be
used if errors or hanging occurs during moves. A value of
-1
disables the
timeout entirely.
RETRY
Specifies that during a
MOVE
, if the destination node is unavailable, a
delay of five seconds should be followed by an attempt to reconnect.
RETRYDELAY
Specifies
RETRY
, as above, with a delay in seconds as specified, instead
of the default time of five seconds.