NBSpool for MPE Reference Guide

Chapter 3
3-56
MOVE Syntax for LAN-connected Printer Destinations
O> MOVE [subset] TO nodename ;PTYPE=printertype
[;COPIES=copies ]
[;NOENV ]
[;DUP ]
[;PRINTER=printername ]
[;START=line ]
[;TIMEOUT=seconds ]
[;RETRY ]
[;RETRYDELAY=seconds ]
MOVE Parameters for LAN-connected Printer Destinations
Parameter Description
subset
This parameter specifies the subset of spool files to be copied. Turn to
Chapter 2 for information on using subsets.
nodename
This parameter specifies the name of the printer as defined in the
network directory entry in the
NMMGR
utility.
printertype
This parameter specifies the type of LAN connected printer. If specified,
the destination node is a printer directly attached to the LAN. Below is a
list of ports to which NBSpool sends successfully:
Print Server/Manufacturer Ptype Port
Digital Netprint 10001 or 10003 N/A
Emulex, Netjet 2501 N/A
Emulex, NetQ 2501 Parallel
Emulex, NetQ 2502 Serial
Hewlett Packard LJ N/A
JetXPrint 104 10001 N/A
Kentek KENTEK N/A
LanPress 1230 Parallel
LanPress 1231 Serial
Lantronix EPS4 3001 N/A
Milan Fast Port 2000 thru 2002 N/A
Netport 3001 Parallel 1
Netport 3002 Parallel 2
Netport 2501 Serial 1
QMS QMS N/A
Xyplex XYPLEX or 2100 N/A
copies
This parameter specifies the number of copies used when creating the
spool file on the remote computer. Must be between
1
and
127
.
Continued