MPE/iX System Utilities Reference Manual (32650-90882)

118 Chapter9
FSCHECK
Operation
CHECKLABEL [CL]
The CHECKLABEL command checks the label table(s) on the specified volume(s) for internal
consistency and verifies that each file label entry has an associated entry in the volume
set's directory. It does not verify the integrity of HFS-syntax files whose file names are
blanked out in the file label.
If neither the CNAME or VNAME parameter is specified, the label table of each volume in the
sytem volume set is checked by default (MPEXL_SYSTEM_VOLUME_SET).
Syntax
CHECKLABEL [DEV=][
ldev ]
[
set_name ]
[ALL]
[;IGNORE]
[;FIX]
[;ASK]
[;LOG=
filename ]
Parameters
ldev Ldev is a number from 1 to 32,767, specifying the logical device on which
the volume to be checked is mounted. The volume must be mounted in the
master or member state, as determined by the DSTAT command.
set_name Set_name is the name of the volume set whose label tables are to be
checked. The volume set must be opened (the set that is master must be
mounted in the MASTER state, as displayed by the DSTAT command).
ALL All checks the label tables on each volume mounted in the MASTER or
MEMBER state as determined by the DSTAT command.
IGNORE Ignore errors detected by CHECKLABEL and continue checking the labels.
FIX Fixes the errors detected by CHECKLABEL and continues checking the
labels.
ASK ASK prompts the user to choose to fix the errors or not. This is the default
option.
filename Filename is the name of a log file on which CHECKLABEL messages are to
be written. If this parameter is omitted, the output will be displayed to
$STDLIST.
Example
fscheck: CHECKLABEL ALL
Return