MPE/iX Error Messages Manual Vol 3 (32650-90880)

Chapter 5 201
Error Messages V iii C 4
TermDSM
ACTION Request a smaller size that is within the legal limits.
160 MESSAGE SR5 Objects cannot exceed 1GB.
CAUSE A request to create an object in SR5 short address space
was received that exceeded the architected maximum SR5
address space of 1GB.
ACTION Create a smaller object, or create the object in long
pointer space.
TermDSM
(TDSM)
15 MESSAGE You have entered an unknown or incorrect
command. Please try again. (TDSM 15)
CAUSE You have entered something that is not a TermDSM
command or a command that is not valid in this context.
ACTION Commands that are valid at this time are listed in the
prompt. Please try again. Type HELP or refer to the
reference documentation for more information.
16 MESSAGE TermDSM has compiled without $partial eval$
in effect. It cannot continue. This problem
must be fixed at the factory. (TDSM 16)
CAUSE Internal error.
ACTION Contact your HP support representative.
17 MESSAGE Your security level (3) is too low to use
TermDSM. Please log on with level
0, 1, or 2 security. (TDSM 17)
CAUSE You do not have the correct user capabilities to use
TermDSM. For level 0, you need SM capability. For level 1,
you need SM or DI capability. For level 2, you need SM or
DI or OP capability.
ACTION Logon as a user with the correct capabilities for the
TermDSM functions you wish to use. Refer to reference
documentation for the security levels of each command
and subcommand.
18 MESSAGE You have entered a bad port number. Port
numbers range from 0 to 7. (TDSM 18)
CAUSE The value you entered is not a number between zero and
seven.