MPE/iX Error Messages Manual Vol 3 (32650-90880)

194 Chapter4
Error Messages Viii C 3
System Disk Load
correct.
336 MESSAGE An error was received from CREATE_OBJECT for
the tape MPE/iX label.
CAUSE Error returned from CREATE_OBJECT for tape MPE/iX
label buffer.
ACTION Determine cause of error from CREATE_OBJECT and
correct.
337 MESSAGE An error was received from HPOPEN for
creating LIF directory.
CAUSE Error from HPOPEN for LIFDIREC file.
ACTION Determine cause of error from HPOPEN and correct.
338 MESSAGE An error was received from FWRITE for the LIF
directory.
CAUSE Error from FWRITE for LIFDIREC file.
ACTION Determine cause of error from FWRITE and correct.
339 MESSAGE An error was received from FCLOSE, closing
the LIF directory.
CAUSE Error from FCLOSE for LIFDIREC file.
ACTION Determine cause of error from FCLOSE and correct.
340 MESSAGE An error occurred writing page 1 of the disk.
CAUSE Error from LOAD_POST writing sector zero and one of
LDEV 1.
ACTION Determine cause of error from LOAD_POST and correct.
341 MESSAGE An error was received from RENDEZVOUSIO
reading the disk labels.
CAUSE Error returned from RENDEZVOUSIO for read disk page
1, sector zero and one.
ACTION Determine cause of error from RENDEZVOUSIO and
correct.
342 MESSAGE An error was received from SENDIO reading the
disk labels.
CAUSE Error returned from SENDIO for read disk page 1, sector
zero and one.
ACTION Determine cause of error from SENDIO and correct.
343 MESSAGE This is not an MPE XL disk. UPDATE failed;
INSTALL required.
CAUSE Disk LDEV 1 is not a valid MPE/iX system master volume.
ACTION Replace with a valid MPE/iX system master and retry.