MPE/iX Error Messages Manual Vol 3 (32650-90880)

Chapter 3 115
Error Messages Viii C 3
Port (IPC) Facility
ACTION Take a system dump and call your Hewlett-Packard
Representative.
110 MESSAGE The procedure attempted to acquire a counting
semaphore port with a global port number
(must access this type of semaphore port with
a local port number).
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
115 MESSAGE The specified value for a port's message
threshold is not valid (must be a positive
number greater than zero).
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
120 MESSAGE The specified port number for the PFP port is
either that of a nonexistent port or a local
port number.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
121 MESSAGE The procedure attempted to create a resident
port and associate it with a non-resident PFP
port (PFP port must have same attributes as
the port).
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
122 MESSAGE The specified PFP port number is a valid port
number, but the port it is associated with is
not a PFP's port.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
123 MESSAGE The procedure is trying to create a PFP or
associate a new port with a PFP, but is
unable to send/receive the initiation message
to/from the PFP.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.