MPE/iX Error Messages Manual Vol 3 (32650-90880)

106 Chapter3
Error Messages Viii C 3
NLIOUTIL
CAUSE Command name incorrect.
ACTION Re-enter the command. Use HELP to check the syntax.
2101 MESSAGE TOO MANY PARAMETERS WERE ENTERED. (NLIO ERR
2101)
CAUSE Same as message.
ACTION Re-enter the command using the correct syntax. Use
HELP to check the syntax.
2102 MESSAGE INVALID DELIMITER WAS ENTERED. (NLIO ERR
2102)
CAUSE The second OPEN delimeter is incorrect.
ACTION Re-enter the command using the correct syntax. Use
HELP to check the syntax.
2110 MESSAGE LDEV CANNOT BE OMITTED FOR NON-INTERACTIVE
STDIN. (NLIO ERR 2110)
CAUSE Same as message.
ACTION Re-enter the command, specifying the ldev.
2111 MESSAGE NO DEVICE IS DESIGNATED FOR SPECIFICED
DEVICE. (NLIO ERR 2111)
CAUSE The device or device class specified does not refer to a
configured device.
ACTION Check the system configuration and re-enter the
command, specifying the correct ldev.
2113 MESSAGE SPECIFIED LDEV n IS NOT A TERMINAL OR
PRINTER. (NLIO ERR 2113)
CAUSE The specified ldev was other than a terminal or a printer.
ACTION Check the system configuration and re-enter the
command, specifying the correct ldev.
2114 MESSAGE SPECIFIED DEVICE CLASS IS NOT A TERMINAL OR
PRINTER. (NLIO ERR 2114)
CAUSE The specified device class does not apply to terminals or
printers.`
ACTION Check the system configuration and re-enter the
command, specifying the correct device class.
2115 MESSAGE INVALID PARAMETER WAS ENTERED. (NLIO ERR
2115)
CAUSE The specified ldev was other than a terminal or a printer.
ACTION Check the system configuration and re-enter the
command, specifying the correct ldev.