MPE/iX Error Messages Manual Vol 2 (32650-90879)

44 Chapter1
Vol. II Chapter 1
Loader, Native Mode
706 MESSAGE Failed to locate data exports for the data imports listed
above. (LDRERR 706)
CAUSE Unresolved data symbols were encountered while
attempting to load the program and/or libraries.
ACTION Alter the binding sequence to contain the specified
unresolved data symbols.
707 MESSAGE Symbol = !
File = !
Export SOM = !
Failed to allocate a global data area for the SOM
containing the desired data symbol. (LDRERR 707)
CAUSE Unable to allocate a global data area for the SOM listed in
the error message.
ACTION Retry. If unsuccessful, record the symbol name, the file
name, and the SOM listed in the error message and call
your Hewlett-Packard Representative.
708 MESSAGE Failed to allocate the header for the Process Data
Dictionary in the Process File List. (LDRERR 708)
CAUSE Unable to allocate the header for the Process Data
Dictionary.
ACTION Retry. If unsuccessful, call your Hewlett-Packard
Representative.
709 MESSAGE Failed to create the Process Data Dictionary. (LDRERR
709)
CAUSE Unable to create the Process Data Dictionary.
ACTION Retry. If unsuccessful, call your Hewlett-Packard
Representative.
710 MESSAGE Failed to place the Process Data Dictionary under the
Symbol Table Management. (LDRERR 710)
CAUSE Unable to put the Process Data Dictionary under Symbol
Table Manager control.
ACTION Retry. If unsuccessful, call your Hewlett-Packard
Representative.
711 MESSAGE Symbol = !
File = !
SOM = !
The export data symbol has an invalid global data
address. (LDRERR 711)
CAUSE A corrupted program/library file was found. An illegal
global address was given to the data symbol.