MPE/iX Error Messages Manual Vol 2 (32650-90879)

372 Chapter9
System Startup, Shutdown, and Configuration (cont)
"Nonclass" Errors
CAUSE Continuation of previous message.
ACTION Continuation of previous message.
1006 MESSAGE **error** Can't write to offline list device!
CAUSE The offline device is probably connected and active, but the
output spooling function is not.
ACTION Use the STARTSPOOL command and appropriate device
number from the master console to activate the output
spooling function.
1007 MESSAGE **error** Can't closs offline list device!
CAUSE For whatever reason, SYSGEN cannot close the list device.
1008 MESSAGE **error** You must have SM capability to do a
KEEP!
1009 MESSAGE **error** user has insufficient capability.
SYSGEN TERMINATES.
CAUSE The account has insufficient capability to allow you to
change or view SYSGEN data. You are probably trying to
access SYSGEN from the wrong account.
ACTION Use the SHOWME command to see the current account. Log
on to an account with sufficient capability to request the
operator to add the capability to your account.
1010 MESSAGE **error** Catalog is missing a path type
message.
1011 MESSAGE **error** You must have SM capability to make
changes
1012 MESSAGE **error** Can't close a permanent
configuration file
CAUSE For whatever reason, SYSGEN cannot close the
configuration data file from that data was written from
one or more temporary files. Program dies.
ACTION Refer to the file system error for action.
1013 MESSAGE **error** Can't read a permanent
configuration file
1014 MESSAGE **error** Can't write a permanent
configuration file
1015 MESSAGE **error** Can't FPOINT a permanent
configuration file
1016 MESSAGE **error** Redo only valid interactively
1018 MESSAGE **error** language localized devtype name too
long.