MPE/iX Error Messages Manual Vol 2 (32650-90879)

Chapter 9 371
System Startup, Shutdown, and Configuration (cont)
"Nonclass" Errors
short!
1070 MESSAGE **error** bad filename--expected period as
delimiter
Other Messages
0500 MESSAGE **warning** missing optional parameter
0520 MESSAGE **warning** Information display only mode ! !
!
CAUSE The account has insufficient capability to make
configuration changes. You can view configuration data
only.
ACTION Add SM capability or access an account, if allowed, with
SM capability.
0530 MESSAGE **warning** offline list device not currently
open
CAUSE This error is caused when the OCLOSE command is entered
and nothing has yet been sent.
ACTION You must have used DEST=OFFLINE at least once since
beginning SYSGEN or the last OCLOSE.
0535 MESSAGE **warning** Can't find CM procedure
doccnmdata!
1000 MESSAGE **error** Can't open file !
CAUSE SYSGEN cannot open the designated file. Usually, the file
does not exist.
ACTION check that you entered the proper file name.
1001 MESSAGE **error** FFILEINFO error on file !
CAUSE The FFILEINFO intrinsic returned an error for file !
ACTION Refer to the file system error message, also returned.
1002 MESSAGE **error** can't open output device
1003 MESSAGE **error** The string ! is too long! (int.
catalog error)
1004 MESSAGE **error** You must have SM capability to make
a tape!
CAUSE The TAPE command has been entered from an account
that does not have SM capability. Generally, you are in the
wrong account and you try to generate a tape.
ACTION Add SM capability or, if allowed, access an account with
SM capability.
1005 MESSAGE subsys=! error=!