MPE/iX Error Messages Manual Vol 2 (32650-90879)

Chapter 4 127
Volume II Chapter 4
System Aborts
774 MESSAGE The procedure CB_FAILER resulted in an
unconditional lock failing while on the ICS.
775 MESSAGE The procedure CB_FAILER detected an attempt
to unlock an unowned semaphore.
776 MESSAGE The procedure CB_FAILER caused a system abort
in an attempt to unlock an unowned semaphore
on the ICS.
777 MESSAGE The procedure CB_FAILER caused a system abort
because access of this semaphore type is not
supported.
778 MESSAGE The procedure CB_FAILER caused a system abort
because the semaphore access procedure is not
allowed on the ICS.
779 MESSAGE The procedure CB_FAILER caused an unknown
error while accessing the semaphore.
780 MESSAGE The procedure SEM_INIT resulted in bad status
from CB_INIT.
781 MESSAGE The CM pseudo count is less than zero.
782 MESSAGE The procedure CM_PSDB_CLEAR resulted in bug
catcher, clearing PSDB count; not blocking on
port WAIT.
783 MESSAGE The procedure GET_POOL_ITEM can not access
message pool table header; bad status from
GET_TABLE_INFO.
784 MESSAGE The procedure FLUSH_SEM_WAIT_QUEUE can not
flush all waiting processes from the
semaphore's wait queue; bad status from
REPLY_TO_WAITER.
785 MESSAGE The procedure CREATE_STD_PFP_PORTS caused an
unexpected escape; creation of standard PFP
port was unsuccessful.
786 MESSAGE The procedure INIT_RES_PORT_FACILITY can not
initialize INTERRUPT or MAKE_PRESENT
semaphore for global port object.
787 MESSAGE The procedure can not allocate port
descriptor for the known global ports; bad
status from MAKE_GLOBAL_DESC.
788 MESSAGE Initialization of the resident port facility
failed due to an unexpected escape from the
procedure.
789 MESSAGE The procedure can not create the port
directory object; bad status received from