MPE/iX Documentation Guide

116 Chapter9
Network and Systems Management
Network and Systems Management Collection
• Using the system generator (SYSGEN).
• Modifying input/output (I/O), logging, and miscellaneous configurations.
• Modifying system file configurations and halting system activity.
Troubleshooting Terminal, Printer, and Other Serial Device
Connections
Part Number: 32022-90030
Functional Focus: Network management and system administration
This manual describes how to troubleshoot devices connected to the Data Communications
and Terminal Controller (DTC) when host-based management is used.
This manual contains information on the following topics:
• Data communications and terminal subsystem (DTS), the LAN interface card (LANIC),
ASC software, and powerfail recovery.
• Troubleshooting and testing procedures for the DTC and LAN.
• Using TermDSM and TermDSM commands.
User's Guide to MPE/iX Security
Part Number: 32650-90471
Functional Focus: System operations
This guide describes the security features provided for general users of HP 3000 systems.
It covers all of the security features and explains how they are implemented.
This guide contains information on the following topics:
• Introduction to the general security features.
• Protecting system access.
• Using Access Control Definitions (ACDs).
• Maintaining file integrity.
Using HP OpenView DTC Manager
Part Number: D2355-95018
Functional Focus: Network management
This manual describes the HP OpenView DTC Manager and explains how to manage,
configure, control, monitor, and diagnose DTCs using an HP OpenView windows
workstation.
This manual contains information on the following topics:
• Introduces to the DTC and HP OpenView DTC Manager.
• Managing DTCs on HP 3000 and HP 9000 systems.