MPE/iX Documentation Guide

114 Chapter9
Network and Systems Management
Network and Systems Management Collection
• Software and line verification.
• Trace and log files.
• Changing a network.
• PING/XL diagnostic tool.
Openview DTC Technical Reference Manual
Part Number: 5961-9882
Functional Focus: Network management
This guide contains technical information on the DTC which, in general, is not needed
during the day-to-day use of the DTC. The guide is intended for network administrators
who implement the more complicated DTC configurations, and troubleshoot connections
involving the DTC.
This manual contains information on the following topics:
• Device names, device addresses, and name-address resolution.
• TCP/IP implementation.
• Modem behavior and hardware handshake.
• Data transfer modes.
• PAD support characteristics, facilities and profiles.
• Implementation of X.25 recommendations 1980 and 1984.
• Differences between old and new asynchronous boards.
• Event logging.
Performing System Management Tasks
Part Number: 32650-90854
Functional Focus: System management
This guide discusses typical tasks and procedures that a system manager might perform.
This guide contains information on the following topics:
• Planning your system backup strategy.
• Managing system hardware components and disks (volume sets).
• Starting up, configuring, and shutting down your system.
• Using Threshold Manager to monitor internal operating system resources.
• Adding devices such as disk drives, tape drives, and printers to your system.
• Setting up system logging.
• Creating accounts, groups, users and directories, and defining system security.
• Changing system libraries, programs, and message catalogs.