MPE/iX Documentation Guide

Chapter 8 101

Networking and Communications

• Program design, buffer management, and debugging.

Managing Host-Based X.25 Links Quick Reference Card

Part Number: 36939-90051

Functional Focus: System administrators and system operators

This card provides a quick reference for users of the DTCCNTRL command who will start,

stop, and control the operation of host-base X.25 connections. Includes syntax and

examples.

It also provides a quick reference for TermDSM users as they display status, verify, and

diagnose the operations of host-based X.25 connections.

This quick reference card contains information on the following topics:

• DTCCNTRL syntax.

• DTCCNTRL examples.

• TermDSM for Host-Based X.25.

• Related documentation.

NetIPC 3000/XL Programmer's Reference Manual

Part Number: 5958-8600

Functional Focus: Network programming

This manual discusses the intrinsics used in network interprocess communication

(NetIPC). NetIPC provides access to the Transmission Control Protocol (TCP) and the X.25

protocol.

This manual contains information on the following topics:

• NetIPC fundamentals including connections and sending/receiving messages.

• Cross-system NetIPC.

• NetIPC intrinsics.

• NetIPC commands.

NS Cross-System NFT Reference Manual

Part Number: 5960-1634

Functional Focus: Network management

This manual describes cross-system NFT (network ﬁle transfer) between HP 1000, HP

3000 (MPE V/E and MPE/iX), HP 9000 (Series 300, 500, and 800), VAX/VMS, and PC

nodes.

This manual contains information on the following topics:

• File copying formats.