MPE/iX Commands Reference Manual (32650-90877)

Chapter 3 93
Command List I
Commands ABORT to BYE
it releases the device(s), or whether it should be aborted.
All commands that normally affect executing jobs, such as ABORTJOB, operate on
suspended jobs. The SHOWJOB command, which lists all jobs, displays SUSP for those in the
suspended state. To list suspended jobs only, enter SHOWJOB SUSP.
Use
This command may be issued from a session, job, program, or in BREAK. Pressing
Break
has no effect on this command. It is executable only from the console unless distributed to
users with the ALLOW command, or if JOBSECURITY is set to LOW.
Examples
To suspend job number 68, enter:
BREAKJOB #J68
To display suspended jobs, enter:
SHOWJOB SUSP
JOBNUM STATE INPRI JIN JLIST INTRODUCED JOB NAME
#68 SUSP 105 LP WED. 7:56AM TEST,USER.ACCT
Related Information
Commands ALTJOB, ABORTJOB, RESUMEJOB, SHOWJOB, STREAM
Manuals Performing System Operation Tasks
BUILD
Creates and immediately allocates a new empty file on disk.
Syntax
BUILD filereferencer
[;REC=[ [ recsize ][,[ blockfactor ][,[FUVB][,BINARY ,ASCII]]]]]
[ ;CCTL [ ;NOCCTL] ]
[ ;TEMP] [ ;DEV= [ dsdevice# dsdevice#device [ device ] ] ]
[ ;CODE= filecode ] BUILD [ ;DISC=[ [ numrec ][,[ numextents ][, initialloc ]]
] ]
[ ;RIO ;NORIO ] [ ;MSG ;CIR ;STD ;KSAMXL ;SPOOL ;KSAM64]
[ ;ULABEL= numlabels ] [ ;KEY={ ^ filereference keyinfo } ]
[ ;FIRSTREC= recnum ] [ ;REUSE ;NOREUSE ]
[ ;langid={ langid langname } ]
[ { ;DEFBLK ;OPTMBLK }]
Parameters
filereference Actual name of the file to be created. The filereference can be either
in MPE of HFS Syntax.