MPE/iX Commands Reference Manual (32650-90877)
Chapter 14 619
Command List XII
Commands STREAM thru XEQ
[;TREE [;NOTREE]]
[;NODECOMPRESS]
[;STOREDIR] [ECTORY] =
directoryname
] [;PART [IAL] DB]
[;RESTORESET=(
device
[,...])]
The following parameters are available with TurboStore/iX II and TurboSTORE/iX
True-Online Backup products only:
[;RESTORESET=(
device
[,...]) [,(
device
[,...])[,...]]]
[;MOSET=(ldev[,...])[,(ldev[,...]) [,...]]
[ ;NAME=
backupname
]
Parameters
vstorefile
The name of the device that contains the files you want verified on the
system. This file must be backreferenced, using an asterisk (*). A File
equation for
vstorefile
should be set up before invoking VSTORE. If you
want to verify files from a file called SOURCE enter this file equation
before running VSTORE:
:< user FILE SOURCE;DEV=TAPE
The
vstorefile
can now reference a remote device. For example,
:< user |FILE REMOTE;DEV=REMSYS#TAPE|
:< user |VSTORE *REMOTE;@;SHOW|
NM Vstore will verify all files from the specified remote device. Although
the initial tape mount request will appear on the remote console, all of
Vstore's console messages will be displayed on the local console. Currently,
labeled tapes and Magneto-optical devices cannot be used for remote
verification.
A message is displayed on the system console requesting the operator to
mount the tape identified by the
vstorefile
parameter and to allocate
the device.
If
vstorefile
is not supplied and the RESTORESET option is not used, then
VSTORE creates a default file name. The default file name is the user's
logon username. No file equation is used.
Sequential and parallel devices are specified with the RESTORESET option.
Similarly, magneto-optical devices are specified using the MOSET option.
You should not specify
vstorefile
when using RESTORESET or MOSET.
A disk file can also be specified with a file equation for
vstorefile
. An
example of such a file equation would be:
:< user |FILE MYDISC=DISCBACK.DAILY.BACKUP;DEV=DISC|
Note that DEV=DISC must be specified for VSTORE to verify files from disk
backups. All other information in the file equation will be ignored by
VSTORE.
NOTE
TurboSTORE/iX 7x24 True-Online Backup must be used to create disk