MPE/iX Commands Reference Manual (32650-90877)

544 Chapter13
Command List XI
Commands SHOWLOG thru STORE
Use
This command may be issued only at the physical console.
Example
To shut the system down, first issue a warning to all users to allow them time to log off,
and then execute =SHUTDOWN as shown below:
WARN @;SYSTEM WILL SHUTDOWN IN FIVE MINUTES. PLS LOG OFF.
CTRL A
=SHUTDOWN
10:49/#S40/25/LOGOFF
10:49/20/ALL JOBS LOGGED-OFF
To shut down the system in order to identify a DTC hang, use the dtc option. The console
responds by listing shutdown messages similar to these:
CTRL A
=SHUTDOWN dtc
Shutdown of operating system begins. (Shut 1)
Shutdown of user processes begins. (Shut 2)
Shutdown of jobs & sessions begins. (Shut 3)
Spoolers notified of a shutdown. (Shut 16)
Shutdown of system processes begins. (Shut 4)
Shutdown of system managers begins. (Shut 5)
Shutdown of operating system complete. (Shut 6)
Related Information
Commands =LOGOFF
Manuals System Startup, Configuration, and Shutdown Reference Manual
SHUTQ
Closes the spool queue(s) for the specified logical device, device name, or all members of a
device class. (Native Mode)
Syntax
SHUTQ{
ldev [;SHOW] devclass [;SHOW] devname [;SHOW] @ }
Parameters
ldev The logical device number of the device.
devclass The device class name of the devices.
devname The device name of the device. Note that it is not possible to have a device
class name and a device name that are the same. If you enter an
alphanumeric character string, the command searches the device class list
first, and then the device name list.
SHOW The SHOW parameter displays the current queue state (enabled or