MPE/iX Commands Reference Manual (32650-90877)

Chapter 13 525
Command List XI
Commands SHOWLOG thru STORE
Syntax
SHOWLOGSTATUS[
logid ]
Parameters
logid Displays status of the user logging file associated with the logging
identifier,
logid , created by the GETLOG command. Default is that the
status of all logging identifiers is displayed.
Operation Notes
This command lists the status of currently running logging processes. The status includes
the total number of records written by the process and the number of users accessing the
logging file. By default this command gives the following information about all currently
running logging processes. To display the status of the logging identifier LEN, enter:
SHOWLOGSTATUS LEN
LOGID CHANGE AUTO USERS STATE CUR-REC MAX-REC % USED CUR-F
LEN NO NO 4 INACTIVE 100 1000 10% 1
The information provided in this format is defined as follows:
COLUMN MEANING
LOGID The name of the logging process.
CHANGE Whether the CHANGELOG command is permitted (whether the name of the
first logging file ends in 001).
AUTO Whether an automatic CHANGELOG has been enabled (whether the AUTO
parameter has been specified through the ALTLOG or GETLOG command).
USERS The number of users accessing the logging file.
STATE ACTIVE, INACTIVE, INITIALIZING, or RECOVERING. INACTIVE is
displayed when a process is waiting for information from user processes
that involve intrinsics. INITIALIZING starts the log process.
RECOVERING is displayed immediately after a START RECOVERY is
issued.
CUR-REC The number of records in the log file.
MAX-REC The maximum number of records permitted.
% USED The percentage of the maximum used.
CUR-F The current file number in the set.
Use
This command may be issued from a session, job, program, or in BREAK. Pressing
Break
has no effect on this command.
Example
Refer to "Operation Notes."