MPE/iX Commands Reference Manual (32650-90877)

524 Chapter13
Command List XI
Commands SHOWLOG thru STORE
Commands SHOWLOG thru STORE
SHOWLOG
Displays the number of the system's current log file and the percentage of disk space used.
(Native Mode)
Syntax
SHOWLOG
Parameters
None.
Operation Notes
The log file number,
xxxx , and percentage of file space used, yy , is displayed in the format:
SYSTEM LOG FILE # xxxx IS yy % FULL
If the logging system is disabled, MPE/iX displays the message:
NO LOGGING
If logging is enabled but currently suspended due to an error, both messages are displayed.
Use
This command may be issued from a session, job, program, or in BREAK. Pressing Break
has no effect on this command. System supervisor (OP) capability is required to use this
command.
Example
To display the current log file status, enter:
SHOWLOG
SYSTEM LOG FILE #7 IS 20% FULL
Related Information
Commands ALTLOG, CHANGELOG, GETLOG, LISTLOG, LOG, OPENLOG, RELLOG, RESUMELOG,
SHOWLOGSTATUS, SWITCHLOG
Manuals Performing System Operation Tasks
System Startup, Configuration, and Shutdown Reference Manual
SHOWLOGSTATUS
Displays status information about currently opened user logging files assigned to a logging
identifier.