MPE/iX Commands Reference Manual (32650-90877)

504 Chapter12
Command List X
Commands SAVE thru SHUTQ
MPE/iX operating system is compiled. This V.UU.FF number cannot be
changed and is used when entering a service request (SR) against the
MPE/iX operating system product for that particular release.
CURRENT Shows the current time and date.
LOGON Shows the logon time.
CPU SECONDS Shows the central processor time (CPU) used by this job/session.
NOTE SHOWME calculates CPU usage by adding the local CPU usage of the current
process to the accumulated total of all terminated processes. The CPU usage
listed for a programmatic SHOWME, therefore, would rarely agree with that for
a SHOWME executed during BREAK.
CONNECT MINUTES The amount of time the job/session has been connected.
$STDIN LDEV The logical device number of the job or session's standard input device.
$STDLIST LDEV The standard list device number.
Use
This command may be issued from a session, job, program, or in BREAK. Pressing
Break
aborts the execution of this command.
Example
Refer to "Operation Notes."
Related Information
Commands HELLO, JOB, SHOWJOB
Manuals None
SHOWOUT
Displays the status of output device files.
Syntax
SHOWOUT[{ #O nnn STATUSSP item [; item [;...]]} ]
Parameters
#O nnn Identifies a particular output device file for which you want information.
The information is displayed in Type I format, which is described in the
"Operation Notes" section of this command. The default is to display status
information for all output device files used by the logon job or session.
The number of the device file identifier is identical to the LDEV number of
the device. For example, if the LDEV number is 20, the device file
identifier appears in the DFID column as #20.
STATUS Summarizes the status information for all current output device files. The