MPE/iX Commands Reference Manual (32650-90877)

Chapter 12 501
Command List X
Commands SAVE thru SHUTQ
Related Information
Commands ABORTJOB, BREAKJOB
Manuals Performing System Operation Tasks
SHOWLOG
Displays the number of the system's current log file and the percentage of disk space used.
(Native Mode)
Syntax
SHOWLOG
Parameters
None.
Operation Notes
The log file number,
xxxx , and percentage of file space used, yy , is displayed in the format:
SYSTEM LOG FILE # xxxx IS yy % FULL
If the logging system is disabled, MPE/iX displays the message:
NO LOGGING
If logging is enabled but currently suspended due to an error, both messages are displayed.
Use
This command may be issued from a session, job, program, or in BREAK. Pressing Break
has no effect on this command. System supervisor (OP) capability is required to use this
command.
Example
To display the current log file status, enter:
SHOWLOG
SYSTEM LOG FILE #7 IS 20% FULL
Related Information
Commands ALTLOG, CHANGELOG, GETLOG, LISTLOG, LOG, OPENLOG, RELLOG, RESUMELOG,
SHOWLOGSTATUS, SHOWNMLOG, SWITCHLOG, SWITCHNMLOG
Manuals Performing System Operation Tasks
System Startup, Configuration, and Shutdown Reference Manual
SHOWLOGSTATUS
Displays status information about currently opened user logging files assigned to a logging
identifier.