MPE/iX Commands Reference Manual (32650-90877)

490 Chapter12
Command List X
Commands SAVE thru SHUTQ
Operation Notes
Prints the current time, date, the time correction in effect, and the time zone. See the
command SETCLOCK for information about time correction and time zone.
Use
This command may be issued from a session, job, program, or in BREAK. Pressing
Break
has no effect on this command.
Example
:<user |SHOWCLOCK|
SYSTEM TIME: FRI, JUL 24, 1987, 8:47:35 AM
CURRENT TIME CORRECTION: -3428 seconds
TIME ZONE: 7 HOURS 0 MINUTES WESTERN HEMISPHERE
Related Information
Commands SHOWTIME, SETCLOCK
Manuals None
SHOWDEV
Reports the status of input/output devices.
Syntax
SHOWDEV[ ldev classname ] [;ACD]
Parameters
ldev Logical device number of device for which status information is to be
displayed. This number is unique for each device. Default is that status
information for all system devices on the system is displayed.
classname Device class name of device(s) for which status information is to be
displayed. This name may apply to several devices. Default is that status
information for all devices on the system is displayed.
ACD Keyword requesting display of ACD (access control definition) for the
device.
Operation Notes
The SHOWDEV command displays the status information for all input and output devices on
the system. The display spacing is important and has been changed after the 4.7 release.
The display appears in the following format:
SHOWDEV
Total number of blanks between items after release 4.7
5 9 9 9 3