MPE/iX Commands Reference Manual (32650-90877)

488 Chapter12
Command List X
Commands SAVE thru SHUTQ
Example
To list the operator commands allowed to the user USER.SYS, enter:
SHOWALLOW USER.SYS
#S86 USER.SYS
USER HAS THE FOLLOWING COMMANDS ALLOWED:
ABORTIO ACCEPT DOWN GIVE
THERE ARE NO GLOBAL ALLOWS DEFINED.
Related Information
Commands ALLOW, DISALLOW
Manuals Performing System Operation Tasks (32650-90137)
SHOWCATALOG
Displays information about user-defined commands (UDCs). (Native Mode)
Syntax
SHOWCATALOG[ listfile ] [;USER= username [. acctname ]]
Parameters
listfile An arbitrary file name that identifies the output from SHOWCATALOG that is
sent to the line printer. Specifying
listfile sends the listing to device
class LP (line printer). You may use a file equation to direct the listing of
the catalog to a disk or tape file. If you omit this parameter, the listing is
sent to the $STDLIST device.
USER Permits the user to list other users' cataloged files. Account manager
capability (AM) is required to show cataloged files for users within your
logon account. System manager capability (SM) is required to show users'
cataloged files in other accounts.
username. acctname Specifies the user and/or account name whose file names are to be
displayed. The @ wildcard character may be used to specify all the
members of a set:
USER= username
USER= username.acctname
USER=@. acctname
USER=@.@
Operation Notes
This command lists user-defined command files, their commands and the level at which
they were cataloged (user, account, or `system). This may not be the executing UDC
catalog directory, as with the USER option. The user may specify a
listfile to send the
listing to the line printer. You may use a file equation to direct the listing of the catalog to
another disk or tape file. Default is that the listing is sent to the $STDLIST device.
If SETCATALOG is performed with the USER option after the user logs on, the user's