MPE/iX Commands Reference Manual (32650-90877)

344 Chapter9
Command List VII
Commands MOUNT thru OUTFENCE
NS network services:
:NETCONTROL START;NET=LAN1
:NETCONTROL START;NET=WIDE
:NSCONTROL START
Stop all Network Services, while letting existing users continue their work:
:NSCONTROL STOP
Stop the VT and Reverse VT services only. Let all other started services remain available:
:NSCONTROL STOP=VT,VTR
Enable logging of information from DSLINE and REMOTE HELLO commands, and
service requests received by the DSDAD process:
:NSCONTROL LOG=ON,ENV,LOW;LOG=ON,DSDAD,HIGH
Set the minimum number of running DSSERVER processes to 2 and the maximum to 10:
:NSCONTROL SERVER=DSSERVER,2,10
Show the status of Network Services:
:NSCONTROL STATUS=SERVICES
SERVICE TYPE SERVER DESCRIPTION
.
RPM REMOTE DSSERVER INCOMING REMOTE PROCESS MANAGEMENT
VTL LOCAL VTSERVER OUTGOING VIRTUAL TERM
VT REMOTE VTSERVER INCOMING VIRTUAL TERMINAL
.
.
.
Display the overall version and product number of the Network Services subsystem:
:NSCONTROL VERSION
Network Services overall subsystem version: B.00.10
NS3000/XL SERVICES: 36920B
Related Information
Commands NETCONTROL
Manuals Migration Process Guide
OCTCOMP
Converts a compiled MPE V/E program into native mode (NM) code for the HP 3000 Series
900. (Native Mode)
CAUTION Before using this command be sure your logon group and account does not
contain files of the form Yn, Ynn or Ynnn where n is any alphanumeric
character. OCTCO
MP may create temporary files named in this format and similarly named
permane nt files may cause an error condition.