MPE/iX Commands Reference Manual (32650-90877)

150 Chapter5
Command List III
Commands DATA thru EXIT
Operation Notes
The DEBUG command enters the system debugger. An optional parameter,
commands ,
defines a string of system debugger commands that are executed when the debugger is
invoked, but before the debugger prompt is displayed.
If the string contains commands that return the user to the command interpreter, those
commands are executed. Any remaining commands are pushed onto a command stack.
Another invocation of the DEBUG command executes the commands saved on the stack. If
you invoke DEBUG X;Y;Z and the command X returns control to the CI, then DEBUG A;B;C
executes the commands A;B;C;Y;Z.
Use
This command may be issued from a session, program, or in BREAK. It may not be issued
from a job. Pressing
Break has no effect on this command. Privileged mode (PM) capability
is required to use this command.
Example
To produce a stack trace and return to the command interpreter:
DEBUG TRACE;C
DEBUG XL A.00.00
HPDEBUG Intrinsic at: a.006b4104 hxdebug+$130
PC=a.006b4104 hxdebug+$130
* 0) SP=40221c58 RP=a.006b8e7c exec_cmd+$73c
1) SP=40221ac8 RP=a.006ba41c try_exec_cmd+$ac
2) SP=40221a78 RP=a.006b8638 command_interpret+$274
3) SP=40221620 RP=a.006bae5c xeqcommand+$1d0
4) SP=40221210 RP=a.006b7604 ?xeqcommand+$8
export stub: 7d.000068dc main_ci+$94
5) SP=40221178 RP=7d.00007420 PROGRAM+$250
6) SP=40221130 RP=7d.00000000
(end of NM stack)
:
Related Information
Commands RESETDUMP, RUN, SETDUMP
Manuals System Debug Reference Manual
DELETESPOOLFILE
Deletes a spoolfile from disk.
Syntax
DELETESPOOLFILE{#O nnn #I nnn ldev }