Legato Networker ClientPak for MPE/iX Users Guide

7
Preface
TheLegato NetWorker ClientPak for MPE/iX contains instructions on how to use
the NetWorker backup, recover, and archive software from an MPE/iX client
workstation. MPE/iX is the operating system for Hewlett-Packard’s HP 3000
business servers. This guide explains how to back up data on MPE/iX client to
aNetWorker server. It also explains how to browse the online file index to
recover data. Instructions for using the optional Legato NetWorker Archive
Application are also included.
For information on server configuration and administration, refer to the Legato
NetWorker Administrator’s Guide that is distributed with Legato NetWorker
server software. The Legato NetWorker Administrator’s Guide includes detailed
information on the functionality of NetWorker. You can access PDF or
postscript versions of the Legato NetWorker documentation through the
Document Library option at www.legato.com.
If you have used NetWorker on a UNIX or NT server, then you know that
NetWorker normally has a graphical user interface (GUI). The NetWorker
ClientPak for MPE/iX does not have a GUI. Instead, you enter commands
from an MPE/iX Command Interpreter (CI) shell or from a POSIX shell if you
prefer. From the MPE client, you can enter commands to do client-initiated
backups, recovers, and archives of your data. However, to configure your MPE
client to be included in the automatic server-initiated backups, you use the
nwadmin GUI on the NetWorker server for your HP 3000 MPE client.
The NetWorker ClientPak for MPE/iX is tightly integrated with HP’s
TurboSTORE software to provide enterprise storage management capability.
HP’s TurboSTORE/iX products provide high-performance backup solutions.