Legato Networker ClientPak for MPE/iX Users Guide
Recovering a Group of Files
38
3
1. Mark the files that you want to recover by entering the NetWorker add
command, then enter the characters that create a common pattern in the
filename and substitute an asterisk for the different characters in the
filename, as in the following example:
recover> add
r*
The following message is displayed:
5 file(s) marked for recovery
2. Start the recovery process as follows:
recover> recover
NetWorker displays the following message:
Recovering 5 files into their original locations
Volumes needed (all on-line):
jupiter.012 at /source/rmt/data
Requesting 5 file(s), this may take a while...
Legato NetWorker for MPE/iX version 5.0
(C) 1997 Legato Systems Inc.
>> TURBO-STORE/RESTORE VERSION C.55.29 B5152AA
<<
(C) 1986 HEWLETT-PACKARD CO.
RESTORE ; ;SHOW;NW3K;CREATE
WED, DEC 17, 1997, 5:02 PM
'CREATE' OPTION DEFAULTING TO
'CREATE=ACCOUNT,GROUP,CREATOR,PATH'
BASED ON YOUR CAPABILITIES (S/R 502)
WARNING: YOUR DEFAULT FILESET BECOMES '@.@.@' SINCE YOU
HAVE OP OR SM CAPABILITY (S/R 1911)
VOLUME RESTRICTIONS SECTORS CODE MEDIA FILENAME
DISC :C 0 1
/projects/project1/reports*
/rep1
DISC :C 0 1
/projects/project1/reports*
/rep2