Legato NetWorker ClientPak for MPE/iX Installation Guide

9
Important: You should not carry out any other work as NETWRKR.SYS.
To install the ClientPak software, follow these steps:
1. Change directories to the legato directory:
: CHDIR / legato
2. Begin the installation with the following command:
: ./NSRIZE INSTALL
The following script text is displayed on the screen:
NetWorker(TM) - Release 5.0
Copyright (c) 1990-1997, Legato Systems, Inc. All
rights reserved.
This product includes software developed by the
University of California, Berkeley and its
contributors.
NSRIZE is about to INSTALL NetWorker client software on
machine MARS.
Do you want to continue? [Yes] [Enter]
In order to install the NetWorker software a new MPE
group must be added to your system. If you wish NSRIZE
to automatically create the MPE group, answer `yes' to
the question below. If you wish to create the MPE group
manually respond `no'. For further information please
read 'Installing the NetWorker Software' and 'Manually
Creating the MPE Group' sections in the Installation
Guide.
Do you wish NSRIZE to create the group automatically
[yes]? [Enter]
If you responded no to creating the group automatically, see “Manually
Creating the MPE Group” (on page 10).
If you responded yes to creating the group automatically, the installation
continues and the following message is displayed:
Installing the NetWorker executables.
Making the symbolic links.