Legato NetWorker ClientPak and Storage Node Installation Guide

Appendix A: Common NetWorker Commands

This appendix contains a table of common NetWorker commands and includes

instructions on how to display the man pages.

Common NetWorker Commands

Table 3 lists the commands used in the installation and configuration of the Legato

NetWorker Client/Storage Node, MPE/iX Version.

Table 3. Common NetWorker Commands

MPE/iX Command UNIX Manual Page Description

JBCONFIG jbconfig

Configures a jukebox (Media Changer

Device) for a NetWorker server.

JBEXER jbexercise

Tests the functionality of a jukebox.

JBINFO jbinfo

Tests a jukebox for SJI compliance using

a standard inquiry. It also performs

medium transfers between tape drives

and slots.

NSRIZE nsr_ize Installs and removes NetWorker

NSRJB nsrjb

Manages jukeboxes for NetWorker

servers.

NSRMMD nsrmmd

The nsrmmd daemon provides RPC-

based media multiplexing and

demultiplexing service.

SCANNER scanner

Directly reads NetWorker media, such

as backup tapes or disks, to confirm the

contents of a volume, extract a save set

from a volume, or rebuild the

NetWorker online indexes.

TAPEEXER tapeexercise

Writes sample data to a tape, and tests

to see if positioning and read

operations perform as expected to the

NetWorker server.