Installing and Managing HP ARPA File Transfer Protocol Network Manager's Guide (36957-90157)

Appendix A 79
Error Messages
FTP User Messages and Errors
ACTION: When a connection for a data transfer is established, TCP
tracing will be turned on.
MESSAGE: Data tracing off.
FTPINFO 57 CAUSE: The FTP trace command was entered when data tracing was
enabled.
ACTION: None.
MESSAGE: Command tracing file name is !.
FTPINFO 58 CAUSE: Command tracing was turned on and a connection to a remote
system was established.
ACTION: Use this file for debugging purposes.
MESSAGE: Data tracing file name is !.
FTPINFO 59 CAUSE: Data tracing was turned on and a data transfer connection was
established.
ACTION: Use this file for debugging purposes.
MESSAGE: Using byte-stream mode to transfer files.
FTPINFO 60 CAUSE: The FTP type command was entered without any parameters
while in byte-stream mode.
ACTION: None.
MESSAGE: Unique file name cannot be created.
FTPINFO 61 CAUSE: Either the file name was so long that appending (.1) surpassed
the maximum legal file name length, or every appendage from (.1 up to
.99) was tried and no unique name could be found.
ACTION: Try a different, possibly shorter, file name.
MESSAGE: Append mode not valid with record or file type.
FTPERR 63 CAUSE: Attempt to transfer a non-standard MPE file in append mode.
ACTION: Do not transfer non-standard MPE files in append mode.