Installing and Managing HP ARPA File Transfer Protocol Network Manager's Guide (36957-90157)

74 Appendix A
Error Messages
FTP User Messages and Errors
ACTION: None.
MESSAGE: We only support file structure, sorry. (FTPWARN 19)
FTPWARN 19 CAUSE: The FTP STRUCT command was entered.
ACTION: None.
MESSAGE: We only support non-print format, sorry. (FTPWARN 20)
FTPWARN 20 CAUSE: The FTP FORM command was entered.
ACTION: None.
MESSAGE: Verbose mode off. (FTPINFO 21)
FTPINFO 21 CAUSE: The FTP VERBOSE command was entered when verbose was
enabled.
ACTION: None.
MESSAGE: Verbose mode on. (FTPINFO 22)
FTPINFO 22 CAUSE: The FTP VERBOSE command was entered when verbose was
disabled.
ACTION: None.
MESSAGE: Debugging off (debug=0). (FTPINFO 23)
FTPINFO 23 CAUSE: The FTP DEBUG command was entered when debug was
enabled.
ACTION: None.
MESSAGE: Debugging on (debug=1). (FTPINFO 24)
FTPINFO 24 CAUSE: The FTP DEBUG command was entered when debug was
disabled.
ACTION: None.
MESSAGE: Using ascii mode to transfer files. (FTPINFO 25)
FTPINFO 25 CAUSE: The FTP TYPE command was entered without any parameters
while in ASCII mode.
ACTION: None.
MESSAGE: Using binary mode to transfer files. (FTPINFO 26)
FTPINFO 26 CAUSE: The FTP TYPE command was entered without any parameters
while in binary mode.
ACTION: None.
MESSAGE: Already connected to !; user “user” or “close” first.
(FTPWARN 27)
FTPWARN 27 CAUSE: The user entered the FTP OPEN command during an opened
session.