Installation/Upgrade Procedures for SHAREPLEX

SHAREPLEX
1-2
If you have any questions or if you are unsure about any of the steps, please contact Technical
Support at (714)-720-1434.
Updating From NetBase Global Install
Note.When Step 1 - Stream Netacct has been completed, Step 2 - Install the
NetBase Shell must be performed immediately.
If you are updating from a previous version of NetBase 9.6 or 9.7 that is globally installed, perform
the following steps before you update.
_____
A.Stop all sessions and jobs except for NetBase.
_____
B.If shadowing, flush shadow transactions:
:RUN NBFLUSH.PUB.NETBASE,STOPWAIT;PARM=shadownode#
_____ C. Stop the NetBase background job:
:RUN NBCTRL.PUB.NETBASE;INFO=”STOP NETBASE”
_____ D.Disable the CM intercepts for NetBase:
:RUN NBVERS.PUB.NETBASE,DISABLE
_____ E.If the NMCMDUDC is set, delete it:
:SETCATALOG NMCMDUDC.PUB.NETBASE;SYSTEM;DELETE
_____ F.Back up the NetBase account to tape.