HP e3000/iX Network Planning and Configuration Guide (36922-90037)

Appendix C 217
NS X.25 Migration: NS 3000/V to NS 3000/iX Release 2.0 or Later
To Convert NS 3000/V Files to NS 3000/iX Release 2.0 or Later
To Convert NS 3000/V Files to NS 3000/iX
Release 2.0 or Later
This conversion procedure can be used with NS 3000/V NMCONFIG and
NSCONF files for version V-delta 3 or later.
The procedures that follow are for updating (migrating) configuration
files from a node running NS X.25 3000/V Link to a node that will be
running NS 3000/iX release 2.0 or later. As mentioned, this appendix
does not apply if an MPE V based node is being used as an X.25 server
for NS 3000/XL based machines. When updating a node running NS
X.25 3000/V Link, all NS 3000/V LAN, Point-to-Point, or NRJE as well
as X.25 information will be updated to work with iX 2.0.
NOTE If you are migrating a configuration file from any MPE V based node
acting as an X.25 server for NS 3000/XL based machines (including the
NS X.25 3000/XL Server product) to an NS 3000/iX node that will be
running NS 3000/iX release 2.0 or later, see Appendix D, “NS X.25
Migration: NS 3000/V and NS 3000/XL Release 1.X to iX Release 2.0 or
later.” In that case, you would be merging the server’s NS 3000/V
configuration file with an existing NS 3000/XL 1.X configuration file.
Furthermore, only X.25 information would be updated (not, LAN,
NRJE, or Point-to-Point). The procedures that follow assume that there
is no existing NS 3000/XL NMCONFIG file.
To Delete Secondary NIs (NS/iX Rel. 2.2 or later)
If you are migrating from NS X.25 3000/V (release V delta 7 or later) to
NS 3000/iX release 2.2 or later, make a backup copy of your NS 3000/V
NSCONF file. To migrate to NS 3000/iX release 2.2 or later, you must
delete the secondary NIs in the NS 3000/V NSCONF file before you use
NMMGRVER to convert it.