HP e3000/iX Network Planning and Configuration Guide (36922-90037)

151
9 Configuring a Gateway Half
This chapter describes how to configure the interface between one
gateway half and another gateway half. Gateway halves are one of the
methods you can use to interconnect two separate networks. For
information on configuring a node that is not a gateway half, use this
manual.
Figure 9-1 shows the screen flow for configuring gateway half screens.
Screens unique to gateway half configuration are indicated by bold
boxed screens. [FUNCTION] denotes the function key used at a screen
to invoke the next screen on the screen flow.
Figure 9-1 Gateway Half Link Screen Flow