HP e3000/iX Network Planning and Configuration Guide (36922-90037)

121
7 Configuring a Point-to-Point Node
This chapter provides step-by-step instructions for configuring
Point-to-Point links. (Point-to-Point links are sometimes referred to as
router links.) This manual assumes that you are using the guided
configuration capabilities of NMMGR.
Figure 7-1 shows the screen flow for configuring Point-to-Point screens.
Screens unique to Point-to-Point configuration are indicated by bold
boxed screens. [FUNCTION] denotes the function key used at a screen
to invoke the next screen on the screen flow.
Figure 7-1 Point-to-Point Link Configuration Screen Flow