HP e3000 MPE/iX Release 6.5 System Software Maintenance Manual (30216-90325)

468 AppendixH
Error Messages and Warnings
Stage/iX Messages (STAGEMAN)
/SYS/hpstage/stage_name/stage_contents).
Action Determine the cause of the file open failure, correct the
problem, then re-execute the command (or restart the
Patch/iX process).
1174 Message No contents file found in “
name ”. Can't
do command. (STAGEMAN 1174)
Cause STAGEMAN expected the staging area or directory to
contain a contents file (for example,
/SYS/hpstage/stage_name/stage_contents), which stores
critical information about the corresponding staging area.
However, the contents file was not found.
Action Check the spelling of the staging area name.
Message 1175-1179 not used.
error numbers are in the range 1001 - 1999. (STAGEMAN 1180 Message STAGEMAN
error numbers are in the range 1001 - 1999.
(STAGEMAN 1180)
Cause An ERRMSG command was issued with an error number
that is out of the range of STAGEMAN’s error messages.
Action Re-execute the command with a valid STAGEMAN error
number. The error number is always displayed at the end
of a STAGEMAN error message.
1181 Message DBINARY call failed in converting error number.
(STAGEMAN 1181)
Cause STAGEMAN received a bad status from the DBINARY
intrinsic call while attempting to convert the user's
ERRMSG input to an integer.
Action Contact your Hewlett-Packard Response Center for
assistance.
error number. (STAGEMAN 1182 Message “
name ” is not currently a
STAGEMAN error number. (STAGEMAN 1182)
Cause The user entered a number for ERRMSG that currently
does not correspond to a STAGEMAN error number.
Action Re-execute the command with a valid STAGEMAN error
number. The error number is always displayed at the end
of a STAGEMAN error message.
catalog. CATREAD Error = value (STAGEMAN 1183 Message CATREAD failed in
reading text from the STAGEMAN catalog.
CATREAD Error = value (STAGEMAN 1183)
Cause STAGEMAN received a bad status from the CATREAD
intrinsic while attempting to read a message from the
STAGEMAN catalog, STAGE000.PUB.SYS.