HP e3000 MPE/iX Release 6.5 System Software Maintenance Manual (30216-90325)

462 AppendixH
Error Messages and Warnings
Stage/iX Messages (STAGEMAN)
staging area (FCLOSE ,PURGE option).
Action Determine why the FCLOSE failed, correct the problem,
then re- execute the command.
1112 Message Failed to close file “
name ”
in the staging area. (STAGEMAN 1112)
Cause STAGEMAN received a bad status from the FCLOSE
intrinsic while attempting the close the file.
Action Determine why the FCLOSE failed, correct the problem,
then re-execute the command.
Message 1113 and 1114 not used.
1115 Message Failed to find the staging area in the Globals
file. (STAGEMAN 1115)
Cause STAGEMAN failed to find an entry for the staging area in
the HP Stage/iX Globals file when it expected to find one.
This indicates a problem with the HP Stage/iX facility, and
should be reported to Hewlett-Packard.
Action Contact you Hewlett-Packard Response Center for
assistance.
Message 1116-124 not used.
1125 Message Could not find file “
name ” for getting
LIF information. (STAGEMAN 1125)
Cause STAGEMAN was unable to find the file specified.
Action None
1126 Message LIF entry must be between 1 and
range .
Can't delete. (STAGEMAN 1126)
Cause Only 64 entries are allowed in the LIF Directory.
Therefore STAGEMAN will not allow you to index outside
of this range.
Action None
Message 1127-1129 not used.
1127 Message File equation “
name ” failed
in moving file “
name ” to the staging area.
CIERROR =
value (STAGEMAN 1130)
Cause STAGEMAN received a Command Interpreter (CI) error
in attempting to generate a file equation for moving the
file a staging area.
Action Contact your Hewlett-Packard Response Center for
assistance.
1128 Message COPY command failed in moving file “
name ”
to the staging area. CIERROR =
value (STAGEMAN