HP e3000 MPE/iX Release 6.5 System Software Maintenance Manual (30216-90325)
Appendix H 445
Error Messages and Warnings
Stage/iX Messages (STAGEMAN)
was done to that staging area). Since critical changes have
been made to the HP Stage/iX environment based on the
structure of that staging area, STAGEMAN does not allow
any changes to the staging area to avoid the possibility of
corrupting the environment and/or the system.
Action To make changes to the staging area you must do a SET
back to the Base (or another staging area), and execute the
desired command(s). After the changes are made, you may
re-VALIDATE (if necessary), and SET to the staging area
again.
1025 Message Staging area “
name
” does not exist.
Can't
command
. (STAGEMAN 1025)
Cause STAGEMAN does not recognize the staging area as part of
the HP Stage/iX environment.
Action Check your spelling on the staging area parameter. If the
staging area existed before and a DELETE was not done,
the staging area may need to be recovered (do a HELP on
RECOVER for more information).
1026 Message Staging area “
name
” is already
set for next boot. No action taken. (STAGEMAN 1026)
Cause A SET command was already done to set this staging area
to be used on the next system boot, therefore no action
from STAGEMAN was needed. This warning is for
information purposes only.
Action None
1027 Message The TO file name cannot reside under the HP
Stage/iX
Root Directory. (STAGEMAN 1027)
Cause The user attempted to stage a file whose natural location
was under the HP Stage/iX Root Directory
(/SYS/hpstage/). This action would potentially cause
problems at bootup time, so it is not allowed.
Action Did you really want to do this, or were you just fooling
around?
1028 Message Staging area “
name
” already exists.
Can’t
command
. (STAGEMAN 1028)
Cause A staging area that already exists in the HP Stage/iX
environment was provided as a parameter to a command
that would create a new staging area.
Action Check your spelling on the staging area parameter, choose
a different staging area name, or delete the existing
staging area.