HP e3000 MPE/iX Release 6.5 System Software Maintenance Manual (30216-90325)
442 AppendixH
Error Messages and Warnings
Stage/iX Messages (STAGEMAN)
1008 Message Illegal value. (STAGEMAN 1008)
Cause An unexpected and inappropriate value was supplied for
this parameter.
Re-enter the command with an appropriate value for the
parameter. Do a HELP on the command to determine
appropriate values if necessary.
1009 Message 1009 not used.
1010 Message Transaction aborted per user request. (STAGEMAN
1010)
Cause The user specified “No” to a confirmation of a command.
This warning is printed for information purposes only.
Action None
1011 Message No help available for this command. (STAGEMAN
1011)
Cause This command is not recognized by STAGEMAN’s HELP
facility.
Action Check the spelling of the command.
1012 Message Stage/iX is not initialized. Can't do command.
(STAGEMAN 1012)
Cause The HP Stage/iX environment has not been initialized
with the INITIALIZE command. In this context, the
command given would either cause an error or would
produce unpredictable results, so the command was not
done.
Action Initialize the HP Stage/iX environment with the
INITIALIZE command (do a HELP on INITIALIZE for
more information).
1013 Message Initialize SORT/iX failed. SORT status: Subsys:
value
, Info:
value
(STAGEMAN 1013)
Cause STAGEMAN received an error from the HPSORTINIT
intrinsic of the SORT/iX subsystem.
Action Determine why the HPSORTINIT intrinsic failed. Contact
your Hewlett-Packard Response Center for assistance.
1014 Message Input to SORT/iX failed. SORT status: Subsys:
value
,
Info:
value
(STAGEMAN 1014)
Cause STAGEMAN received an error from the HPSORTINPUT
intrinsic of the SORT/iX subsystem.
Action Determine why the HPSORTINPUT intrinsic failed.
Contact your Hewlett-Packard Response Center for
assistance.