HP e3000 MPE/iX Release 6.5 System Software Maintenance Manual (30216-90325)

416 AppendixH
Error Messages and Warnings
Installer Error Messages (INSTERR)
181 Message Error encountered setting CATALOG file equation.
(INSTERR #181)
Cause The installer attempted to issue the file equation:
:FILE CATALOG.PUB.SYS=CATALOG.INSTALL.SYS
Action • Document any error message text prior to the error.
• FILE Command Table is possibly full.
• Do a LISTEQ command to determine which USER file
equations can be RESET.
• RESET any USER file equations.
• Take appropriate corrective measures and run the
installer again. The installer will reissue any needed
file equations.
• Contact the Response Center if further assistance is
required.
182 Message Error keeping Base Group in the HPCONFIG.SYS
group. (INSTERR #182)
Cause An error occurred when the installer called SYSGEN to
keep a configuration group to the HP reserved
configuration group HPCONFIG.SYS.
Action • Print file AUTOLOG.INSTALL.SYS to view detailed
error from SYSGEN.
• Take appropriate corrective measures and run the
installer again.
• Contact the Response Center if further assistance is
required.
183 Message Error in applying Z02Z216A - AS/DS changes in
SYSGEN.
(INSTERR #183)
Cause The installer invoked SYSGEN.PUB.SYS to add or delete
a number of system files as described in the file
Z02Z216A.INSTALL.SYS. SYSGEN encountered an error
processing the file Z02Z216A.INSTALL.SYS and the
installer trapped on the error condition.
Action • Print file AUTOLOG.INSTALL.SYS to view detailed
error from SYSGEN.
• Take appropriate corrective measures and run the
installer again.
• Contact the Response Center if further assistance is
required.
184 Message Error in making IDP file change in SYSGEN.