HP e3000 MPE/iX Release 6.5 System Software Maintenance Manual (30216-90325)

Appendix H 415
Error Messages and Warnings
Installer Error Messages (INSTERR)
required.
178 Message The installer encountered an error purging a
library
file. (INSTERR #178)
Cause The installer was attempting to purge a library SOM after
adding or copying it to a library.
Action • Document any error message text prior to the error.
• Purge the file and run the installer again.
• Contact the Response Center if further assistance is
required.
179 Message Error encountered setting SYSGEN file equation.
(INSTERR #179)
Cause The installer attempted to issue the file equation:
:FILE SYSGEN.PUB.SYS=SYSGEN.INSTALL.SYS
Action • Document any error message text prior to the error.
• FILE Command Table is possibly full.
• Do a LISTEQ command to determine which USER file
equations can be RESET.
• RESET any USER file equations.
• Take appropriate corrective measures and run the
installer again. The installer will reissue any needed
file equations.
• Contact the Response Center if further assistance is
required.
180 Message Error encountered setting SYSGCAT file equation.
(INSTERR #180)
Cause The installer attempted to issue the file equation:
:FILE SYSGCAT.PUB.SYS=SYSGCAT.INSTALL.SYS
Action • Document any error message text prior to the error.
• FILE Command Table is possibly full.
• Do a LISTEQ command to determine which USER file
equations can be RESET.
• RESET any USER file equations.
• Take appropriate corrective measures and run the
installer again. The installer will reissue any needed
file equations.
• Contact the Response Center if further assistance is
required.