HP e3000 MPE/iX Release 6.5 System Software Maintenance Manual (30216-90325)

394 AppendixH
Error Messages and Warnings
Installer Error Messages (INSTERR)
• Take appropriate corrective measures and run the
installer again. The installer will reissue any needed
file equations.
• Contact the Response Center if further assistance is
required.
94 Message The current INSTALL file is blank or nil.
(INSTERR #94)
Cause An internal installer variable is corrupt. This error
represents a serious problem with an internal variable
passed to the module that updates the staged system
libraries.
Action • If this error is produced, please document all messages
prior to the error. Save the file
AUTOLOG.INSTALL.SYS, and the file
INTLOG.INSTALL.SYS, and then report the problem
to the Response Center for assistance.
95 Message The installer encountered errors adding SOMs to
NM Libraries.
(INSTERR #95)
Cause The installer called the link editor to add or copy a SOM to
either the NL or the XL and the command failed.
Action • Record the error messages preceding this message.
• Print file AUTOLOG.INSTALL.SYS to view detailed
error from link editor.
• Check error message cause and action in the HP Link
Editor/iX Reference Manual.
• Take appropriate corrective measures and run the
installer again.
• Contact the Response Center if further assistance is
required.
96 Message 96 Not used
97 Message An error was encountered purging SOMs in the NM
Library. (INSTERR #97)
Cause The installercalledthelink editor withaPURGEXL;ENTRY=
xxx, command, (where xxx is a SOM name), and the
command failed.
Action • Print file AUTOLOG.INSTALL.SYS to view detailed
error from link editor.
• Check error message cause and action in the HP Link
Editor/iX Reference Manual.
• Take appropriate corrective measures and run the