HP e3000 MPE/iX Release 6.5 System Software Maintenance Manual (30216-90325)

Appendix H 377
Error Messages and Warnings
Installer Error Messages (INSTERR)
CREATEPROCESS error or use the displayed error.
• Check the returned CREATEPROCESS error in the
MPE/iX Intrinsics Reference Manual.
• Perform corrective action for SOMPATCH.
• Ensure group for SOMPATCH has sufficient
capabilities. (need CAP=PH).
• Take appropriate corrective measures and run the
installer again.
• Contact the Response Center if further assistance is
required.
44 Message Error occurred while executing SOMPATCH
commands. (INSTERR #44)
Cause The installer invoked SOMPATCH to binary patch the NL
in the local group. SOMPATCH encountered an error and
the installer trapped on the error condition.
Action • Record all error messages on the screen.
• Check the JCW from SOMPATCH, PATCHJCW, with
SHOWJCW.
• Print file AUTOLOG.INSTALL.SYS to view detailed
error from SOMPATCH.
• Take appropriate corrective measures and run the
installer again.
• Contact the Response Center if further assistance is
required.
45 Message Error occurred while adding or deleting system
programs (INSTERR #45)
Cause The installer invoked SYSGEN to add or delete a system
file. SYSGEN encountered an error and the installer
trapped on the error condition.
Action • Print file AUTOLOG.INSTALL.SYS to view detailed
error from SYSGEN.
• Take appropriate corrective measures and run the
installer again.
• Contact the Response Center if further assistance is
required.
46 Message Error executing SYSGEN commands while building
the CSLT.
(INSTERR #46)
Cause An error occurred while SYSGEN was producing the
Customized System Load Tape (CSLT).